South Bend Heavy 10 Crossslide

[Redmech]

So in the final stages of getting my South Bend heavy 10 ready to start making chips, I have a compound cross slide coming from eBay. I’m curious what the T slot size is for the tool holder. Will my existing stuff fit it? Could someone measure theirs and give me the dimensions. If what I have is too small I’d like to start trying to get the right stuff coming sooner rather than later.

Many thanks!!
Ross,

 

[Redmech]

This is what I currently have. My T slots look smaller than the pics of a heavy 10 compound T slot.

 

[4ssss]

Bottom of the T is 1 3/8" wide
Top of the T is 1" wide
1/2" thick
1/4" thick on the large dimension
2 1/2" long

 

[Dave Paine]

You have your answer in above post, but FYI, this is a useful summary of many tooling dimensions for Southbend lathes.

Southbend tooling information

 

[Redmech]

Bottom of the T is 1 3/8" wide
Top of the T is 1" wide
1/2" thick
1/4" thick on the large dimension
2 1/2" long

You have your answer in above post, but FYI, this is a useful summary of many tooling dimensions for Southbend lathes.

Southbend tooling information

Thank you guys, much appreciated.