Tapmatic x series or procunier ie or 2 e

[ome]

My mill is r-8 taper.
Procunier comes with 1/2 " straight shank.
Tapmatic comes, 33jt, 6jt,1/2-20, 5/8-16
my drawbar is 7/16-20
which tapping head would you recomend for my grizzly g-0755 mill/drill with 220 2 hp singl phase 1725 rpm 8.6A
thanks again
jon

 

[ome]

If you get the arbor that fits, you have a selection to choose from

How about direct R8 mounting

Tapmatic comes, 33jt, 6jt pick one

6JT

<tbody>
</tbody>

http://www.use-enco.com/CGI/INSRIT?PARTPG=INLMKD&PMPXNO=947128&PMAKA=290-3016

or

33JT
http://www.use-enco.com/CGI/INSRIT?PARTPG=INLMKD&PMPXNO=947129&PMAKA=290-3018





or pick one of these to match the tapping head and just use your drill chuck without having to use the drawbar

JT6
http://www.use-enco.com/CGI/INSRIT?PARTPG=INLMKD&PMPXNO=942628&PMAKA=290-3460


Jt33
http://www.use-enco.com/CGI/INSRIT?PARTPG=INLMKD&PMPXNO=941965&PMAKA=290-3462

Hi

I spoke to tapmatic today and decided to step up to Rx series 70 which comes 3JT.

Only found 290-3012 at enco as import
Does anyone know where to get An albreight or some well made brand need an r-8 to 3JT adapter.

Thanksw

Jon