Touch DRO Glass/Magnetic Controller

[JFL4066]

Hi Yuriy,

I just received the glass/magnetic scale controller. You list the controller's pin connections but do you have them by wire color code? That way I would know your red wire is Vcc (or whatever)

• Vcc - +5V supply for the scale - Controller wire Color?
• A - primary input from A channel
• A' - complementary input from A channel
• B - primary input from B channel
• B' - complementary input from B channel
• Ground - 0V (connected to the chassis ground

~John

 

[ycroosh]

John,
If you plug in the connector so the tab faces outward, colors will be:
Red - +5V,
Black - Gnd/0V
White - A
Yellow - A'
Green - B
Blue - B'

You can find more info on the DIY DRO Adapter for Glass Scales page (on the "Documentation" tab.

Hope this helps
Yuriy

 

[JFL4066]

John,
If you plug in the connector so the tab faces outward, colors will be:
Red - +5V,
Black - Gnd/0V
White - A
Yellow - A'
Green - B
Blue - B'

You can find more info on the DIY DRO Adapter for Glass Scales page (on the "Documentation" tab.

Hope this helps
Yuriy

Thank you

John,
If you plug in the connector so the tab faces outward, colors will be:
Red - +5V,
Black - Gnd/0V
White - A
Yellow - A'
Green - B
Blue - B'

You can find more info on the DIY DRO Adapter for Glass Scales page (on the "Documentation" tab.

Hope this helps
Yuriy

Thanks Yuriy. Where is the Documentation Tab?

 

[ycroosh]

It's half-way on the page in the link above.

 

[JFL4066]

Hi Yuriy,

Any reason why you don't ship the screws for the DB9 sockets? Know where I can buy them?