The bearing I used for the adjustable vari-disc.
Install the set screw to hold the brake lever sleeve in place.
Lightly lube the brake lever sleeve and install it. This was the new one...after seeing the picture I removed it and buffed out the light rust...
Press the bearing in until it is completely seated. Like shown in this picture.
The bearing I used for the adjustable vari-disc.
Bearing numbers I used (2 of 2 sets of numbers on the bearing)
Bearing numbers I used (1 of 2 sets of numbers)
Cleaned up and ready to install the new bearing. Press this bearing in by pressing only on the outer race!
expressline99

The bearing I used for the adjustable vari-disc.

Media information

Album
Bridgeport Series 1 VS 2hp belt housing tear down and rebuild
Added by
expressline99
Date added
View count
492
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/63 second(s)
ISO
400
Flash
Off, did not fire
Filename
DSCN5468.JPG
File size
2.3 MB
Date taken
Sun, 09 April 2017 5:11 PM
Dimensions
3648px x 2736px

Share this media

Back
Top