When pressing out the bearing from the bearing sliding housing you want to press from this side and push on the inside race.
Cleaned up and ready to install the new bearing. Press this bearing in by pressing only on the outer race!
The old bearing after being pressed out of the "bearing sliding housing". Not much to this assembly.
Press out the old bearing in the "bearing sliding housing". I used a large socket that fit just inside on this housing.
When pressing out the bearing from the bearing sliding housing you want to press from this side and push on the inside race.
Adjustable vari-disc after bearing sliding housing & bearing have been removed.
Bearing sliding housing with old bearing still in place.
Adjustable vari-disc after the Bearing sliding housing & bearing has been removed.
expressline99

When pressing out the bearing from the bearing sliding housing you want to press from this side and push on the inside race.

This is of course for bearing replacement. I used a large socket that fit just inside on this housing.
Click to expand...

Media information

Album
Bridgeport Series 1 VS 2hp belt housing tear down and rebuild
Added by
expressline99
Date added
View count
436
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/5.6
Focal length
6.3 mm
Exposure time
1/60 second(s)
ISO
200
Flash
On, fired
Filename
DSCN5459.JPG
File size
2.2 MB
Date taken
Sun, 09 April 2017 4:48 PM
Dimensions
3648px x 2736px

Share this media

Back
Top