I keep coming across projects that need a small amount of milling. I have read a lot of peoples comments on how they are junk. For someone without a drill press or any other means of milling I am starting to consider adding a 4"x5" vertical mill table to my lathe.
https://www.ebay.com/itm/LATHE-VERT...893189&hash=item4b475b555c:g:9QoAAOSwxBtbbSAa
It looks like I would also need some sort of clamping set up to hold my work.....
https://www.harborfreight.com/42-piece-machinist-clamping-kit-90752.html
I know you all have way more in sight on this than I do having never used a mill.
https://www.ebay.com/itm/Combo-of-R...922244?hash=item4b4b014784:g:6REAAOSwstJZOrR3
I was wanting to make a ball turning tool for my lathe and see that it requires a slot milled out.
Let me know your thoughts on this.
https://www.ebay.com/itm/LATHE-VERT...893189&hash=item4b475b555c:g:9QoAAOSwxBtbbSAa
It looks like I would also need some sort of clamping set up to hold my work.....
https://www.harborfreight.com/42-piece-machinist-clamping-kit-90752.html
I know you all have way more in sight on this than I do having never used a mill.
https://www.ebay.com/itm/Combo-of-R...922244?hash=item4b4b014784:g:6REAAOSwstJZOrR3
I was wanting to make a ball turning tool for my lathe and see that it requires a slot milled out.
Let me know your thoughts on this.