- Joined
- Jan 28, 2022
- Messages
- 858
Hi, would like to show you my welding table that I made with adjustable/leveling legs. I reworked some trailer tongue stands and inserted them into the 3x3 legs to allow the level of the table or if on an uneven surface take the wobble out. I also mounted a receiver for my vise and grinder with full 360 swing with locking capability. The draw is from a rolling tool cart, and I added outlets to the table The table is 30"x 48 x 3/8" with a 3/8" top. The table extends to a full 8'. The extensions are fully adjustable to maintain a level surface across the span. I also can spin the vise around after removing the handle and hold material over the table using the vise. Thanks for looking.
Last edited: