- Joined
- Feb 10, 2014
- Messages
- 366
Here is my POTPSM (project of the past several months).
Finished a hammer for my mill drawbar.
![IMG_4654.JPG IMG_4654.JPG](https://www.hobby-machinist.com/data/attachments/100/100091-0efb8b769b37f9b8954ed256c7145e43.jpg)
Accomplished my first aluminum casting, which is nothing other than scrap melted down into the shape of a propane cylinder in order to make room on the shelf.
![IMG_4611.JPG IMG_4611.JPG](https://www.hobby-machinist.com/data/attachments/100/100094-49e5ec7717a43d50d1c3b3fced46eb75.jpg)
Made a dust collection fitting from some 16 gauge sheet metal.
![IMG_4567.JPG IMG_4567.JPG](https://www.hobby-machinist.com/data/attachments/100/100096-f0762fd915a463978e6104661098e4f0.jpg)
And lastly, I made a dump bed trailer for my son's Razor Dirt Quad. It isn't finished, i am waiting on electric actuator to show up and then need to put a bottom and side panels on it. He is ecstatic! I even added a reverse switch to it for him.
![IMG_4660.JPG IMG_4660.JPG](https://www.hobby-machinist.com/data/attachments/100/100099-9884cf10e08eef61434221eedd26b290.jpg)
Finished a hammer for my mill drawbar.
![IMG_4652.JPG IMG_4652.JPG](https://www.hobby-machinist.com/data/attachments/100/100089-233cd59ccabb26afc661935bbc7350ed.jpg)
![IMG_4653.JPG IMG_4653.JPG](https://www.hobby-machinist.com/data/attachments/100/100090-b2cedb47f255bc47f2b7c5637cf2bead.jpg)
![IMG_4654.JPG IMG_4654.JPG](https://www.hobby-machinist.com/data/attachments/100/100091-0efb8b769b37f9b8954ed256c7145e43.jpg)
Accomplished my first aluminum casting, which is nothing other than scrap melted down into the shape of a propane cylinder in order to make room on the shelf.
![IMG_4608.JPG IMG_4608.JPG](https://www.hobby-machinist.com/data/attachments/100/100092-cef0f0fbd4b9f8b6716f4fb2f98992e8.jpg)
![IMG_4609.JPG IMG_4609.JPG](https://www.hobby-machinist.com/data/attachments/100/100093-f7f26d3ae550b7264f0a3cd9c83b10fa.jpg)
![IMG_4611.JPG IMG_4611.JPG](https://www.hobby-machinist.com/data/attachments/100/100094-49e5ec7717a43d50d1c3b3fced46eb75.jpg)
Made a dust collection fitting from some 16 gauge sheet metal.
![IMG_4566.JPG IMG_4566.JPG](https://www.hobby-machinist.com/data/attachments/100/100095-b288b7ee5bcfef5aa7e8170dae89456a.jpg)
![IMG_4567.JPG IMG_4567.JPG](https://www.hobby-machinist.com/data/attachments/100/100096-f0762fd915a463978e6104661098e4f0.jpg)
And lastly, I made a dump bed trailer for my son's Razor Dirt Quad. It isn't finished, i am waiting on electric actuator to show up and then need to put a bottom and side panels on it. He is ecstatic! I even added a reverse switch to it for him.
![IMG_4655.JPG IMG_4655.JPG](https://www.hobby-machinist.com/data/attachments/100/100097-848c0e9fc2db6651223c81418747919b.jpg)
![IMG_4657.JPG IMG_4657.JPG](https://www.hobby-machinist.com/data/attachments/100/100098-7dd344b85ca523570fc85dd9ff006a26.jpg)
![IMG_4660.JPG IMG_4660.JPG](https://www.hobby-machinist.com/data/attachments/100/100099-9884cf10e08eef61434221eedd26b290.jpg)