- Joined
- Oct 5, 2013
- Messages
- 18
In this case it's a little easier to tell because the power feeds that are available fit lots of different machines, they come with a coupler with matching cogs and there only seems to be one version of that part.I have not had good luck getting any parts from seemingly identical machines(from Asia) to fit.
Ron just looked and they have what I wanted, loose the plastic, and I can make it work , you should see the I got from Reiable, large SS with a micro dial on it, but it was $7, thanks for the help, GarryYou'd have to do a bit of machining to get it to work but here are a few to look at - http://www.mcmaster.com/#hand-wheels/=qfy5i1
Hope that helps,
-Ron