- Joined
- Nov 8, 2011
- Messages
- 1,678
Benny, You better go with the rack, you have enough boxes full of goodies stashed somewhere you can't find them.:thinking:
That left me with a spare set of mounting brackets. I made a top plate out of 18 gage and, using a 3/4" hole saw drilled over 100 holes.
Benny, You better go with the rack, you have enough boxes full of goodies stashed somewhere you can't find them.
Nice ideas guys. I need to do something about storing my 5C collets. Right now I store them in the boxes they came in and those boxes are piled into one of those plastic bins normally used to store fastening hardware. It's time to upgrade.
Ed
Saw this at work the other night, really nice collet storage
I bought two of the cheap smaller ENCO racks. They were less expensive than the large one.
I cut one so that I gt a pair of two row additions. on the left side I have 5C hex collets, In the middle 5C round to 31/32 the first row on the right goe 1" to 1-1/8 by 1/32 the last are suare collets by 1/8"
(first attachment)
That left me with a spare set of mounting brackets. I made a top plate out of 18 gage and, using a 3/4" hole saw drilled over 100 holes. I use that one for Y-type collets and 3C collets
Saw this at work the other night, really nice collet storage