- Joined
- Nov 5, 2010
- Messages
- 871
A few years back I stumbled upon a small mill base. It was rusty and had no markings, but it followed me home
After a bit of research, I determined it was a Clausing product, though the data plate did not look like a mill:
I am not sure what it was used for.
So I got it home, took it apart, cleaned up all the internal parts, bought new bearings etc. Then it sat disassembled on the shelf for a couple years.
Now that the Benchmaster is finished and gone to a new home, I decided I needed to get going on this again.
After a bit of research, I determined it was a Clausing product, though the data plate did not look like a mill:
I am not sure what it was used for.
So I got it home, took it apart, cleaned up all the internal parts, bought new bearings etc. Then it sat disassembled on the shelf for a couple years.
Now that the Benchmaster is finished and gone to a new home, I decided I needed to get going on this again.