- Joined
- Nov 17, 2020
- Messages
- 1,723
I would like a pile of "scrap" like you have there.One of those things I really don't need, I mean what's a tilt vise and Jo blocks for if not setting angles. But it was cheap because nobody wanted to pay for what amounts to "scrap" metal in todays buyer's market. No collectible value, right? Anyway, I'll clean them up and wrap in vapor paper and stash them away. Might be useful one day. . .
View attachment 391632
.
Two Orange dual station vises, a set of Anderson Manufacturing Serra Jaws, and a Edge Technologies tool height setter. All for the new (to me) Haas TM1.
View attachment 391393View attachment 391394
QTY | Part Number | Name |
1 | 898-016-001 | Saddle Clamp Lever Knob |
1 | 100-019-061 | Saddle Clamp Lever Rod |
1 | 101-212-305 | Quill Feed Handwheel |
1 | 100-020-301 | Ball Plunger |
1 | 100-003-178 | Model/Serial Plate |
8 | 880-110-178 | #4 5/16 Drive Screw |
1 | 880-005-003 | #10-32 x 1/4 SHCS |
1 | 100-003-000 | Cartridge Bearing Lock Nut |
4 | 880-000-048 | 1/4-20 x 3/4 SHCS |
1 | M-0980-140 (QNMTP27610) | Servo 140 Z Axis Knee Power Feed for Wells Index 847 |
2 | 2974 | Servo bottom gear cover |
1 | D3086C-KIT | Bijur One-Shot Lube Tank |
1 | B9230C | Bijur Lubrication Pump Cap |
4 | Leveling Pads |
how will you have to work it off?Well... I got grounded again by the wife and my credit card taken away... but was able to ordered almost everything I needed to get the machines back in working order... Well, it worked fine as it was, just needed the VFD to power it... but got carried away with a few more things that I wanted to make it look nice:
QTY Part Number Name 1 898-016-001 Saddle Clamp Lever Knob 1 100-019-061 Saddle Clamp Lever Rod 1 101-212-305 Quill Feed Handwheel 1 100-020-301 Ball Plunger 1 100-003-178 Model/Serial Plate 8 880-110-178 #4 5/16 Drive Screw 1 880-005-003 #10-32 x 1/4 SHCS 1 100-003-000 Cartridge Bearing Lock Nut 4 880-000-048 1/4-20 x 3/4 SHCS 1 M-0980-140 (QNMTP27610) Servo 140 Z Axis Knee Power Feed for Wells Index 847 2 2974 Servo bottom gear cover 1 D3086C-KIT Bijur One-Shot Lube Tank 1 B9230C Bijur Lubrication Pump Cap 4 Leveling Pads
Was not able to sneak in a Maxi Torque Rite Air Power Draw Bar... that one will have to wait until all privileges are restored. I will use a step to reach the drawbar, lol...
And for the lathe... ordered a new 1/8-5/8 Ultra Precision Keyless Drill Chuck MT3 from Precision Matthews...
Spot on! Exactly like that!!
Damn, big drill... Got plans for that, or just going to make big curls?