Tighten the spindle nose piece on with the set screw once aligned. Test the spindle to make sure it spins without binding.

Tighten the spindle nose piece on with the set screw once aligned. Test the spindle to make sure it spins without binding.

  • Reaction score 0
  • Comments 0
Install the spindle nose piece. You will probably have to back off the nose piece to get it to align with the counter sink in the threads.

Install the spindle nose piece. You will probably have to back off the nose piece to get it to align with the counter sink in the threads.

  • Reaction score 0
  • Comments 0
Quill view showing where the set screw for the spindle nose piece goes. It's on the back of the quill.

Quill view showing where the set screw for the spindle nose piece goes. It's on the back of the quill.

  • Reaction score 0
  • Comments 0
Spindle nose piece showing the set screw and the set screw countersink.

Spindle nose piece showing the set screw and the set screw countersink.

  • Reaction score 0
  • Comments 0
Spindle nose piece assembly with set screw.

Spindle nose piece assembly with set screw.

  • Reaction score 0
  • Comments 0
Install your spindle. Make sure it's clean and becareful when feeding it in to get it through the middle of the felt washer at the top of the quill.

Install your spindle. Make sure it's clean and becareful when feeding it in to get it through the middle of the felt washer at the top of the quill.

  • Reaction score 0
  • Comments 1
The installed depth scale.

The installed depth scale.

  • Reaction score 0
  • Comments 0
Where the depth scale gets installed.

Where the depth scale gets installed.

  • Reaction score 0
  • Comments 0
Depth scale.

Depth scale.

  • Reaction score 0
  • Comments 0
Install the locking bolt handle....it screws in.

Install the locking bolt handle....it screws in.

  • Reaction score 0
  • Comments 0
Front view of locking bolt installed.

Front view of locking bolt installed.

  • Reaction score 0
  • Comments 0
Back view after installing both shoes and the locking bolt.

Back view after installing both shoes and the locking bolt.

  • Reaction score 0
  • Comments 0
Installing the threaded locking shoe.

Installing the threaded locking shoe.

  • Reaction score 0
  • Comments 0
Insert the Lock bolt with the unthreaded locking shoe from the front. Showing how the shoe needs to be angled.

Insert the Lock bolt with the unthreaded locking shoe from the front. Showing how the shoe needs to be angled.

  • Reaction score 0
  • Comments 0
Insert the Lock bolt with the unthreaded locking shoe from the front.

Insert the Lock bolt with the unthreaded locking shoe from the front.

  • Reaction score 0
  • Comments 0
Showing how the assembly is installed once inside of the head unit.

Showing how the assembly is installed once inside of the head unit.

  • Reaction score 0
  • Comments 0
This is the threaded locking quill shoe. It goes on the side with the threads on the lock bolt.

This is the threaded locking quill shoe. It goes on the side with the threads on the lock bolt.

  • Reaction score 0
  • Comments 0
This is the Unthreaded locking quill shoe. It goes on the side nearest the front of the lock bolt.

This is the Unthreaded locking quill shoe. It goes on the side nearest the front of the lock bolt.

  • Reaction score 0
  • Comments 0
This is where the quill locking assembly is installed.

This is where the quill locking assembly is installed.

  • Reaction score 0
  • Comments 0
Quill locking assembly.

Quill locking assembly.

  • Reaction score 0
  • Comments 0
Top view looking down after everything is installed on the quill stop screw, reverse trip ball lever, and the cover screw.

Top view looking down after everything is installed on the quill stop screw, reverse trip ball lever, and the cover screw.

  • Reaction score 0
  • Comments 0
Cover screw installed holding it all in place.

Cover screw installed holding it all in place.

  • Reaction score 0
  • Comments 0
Install the cover screw after you ensure that the quill stop screw moves up and down pushing the plunger in and out.

Install the cover screw after you ensure that the quill stop screw moves up and down pushing the plunger in and out.

  • Reaction score 0
  • Comments 0
Insert the reverse trip ball lever using the 5x40 screw.

Insert the reverse trip ball lever using the 5x40 screw.

  • Reaction score 0
  • Comments 0
expressline99

Bridgeport Series 1 VS 2hp lower end putting it back together.

The rebuilding it part... back in the parts and new ones go!
Click to expand...

Album information

Album owner
expressline99
Date created
Item count
123
View count
10,767
Comment count
2
Rating
5.00 star(s) 1 ratings

Album privacy

expressline99

expressline99

Media items
1,002
Albums
19
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top