The yoke with the feed nuts removed. Showing adjustment screws and locking screws.
There is an oil distribution block on the bottom of the saddle if you have an oiler. Remove the feed line.
Remove the saddle lock from the left side of saddle. Mine has the handle missing.. I'll make one later.
One of my feed nuts had an recess in it all the way around. Not sure what that one is for.
The yoke with the feed nuts removed. Showing adjustment screws and locking screws.
After the screws are removed you can pull the feed nut(s) free. Same steps to remove either one. Take them both out.
Remove the adjusting screw.
Cleaned up a bit... Remove the small locking screw.
expressline99

The yoke with the feed nuts removed. Showing adjustment screws and locking screws.

Media information

Album
Bridgeport Series 1 VS 2hp Tear down of the table and saddle
Added by
expressline99
Date added
View count
778
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/30 second(s)
ISO
200
Flash
Auto, fired
Filename
DSCN6080.JPG
File size
2.3 MB
Date taken
Sun, 06 August 2017 6:37 PM
Dimensions
3648px x 2736px

Share this media

Back
Top