- Joined
- Oct 16, 2017
- Messages
- 339
Another little PM935 mill upgrade that's been on the list for awhile. I wanted a fast travel stop nut that does not require a spring.
This nut is made from 303 and 360.
![P1010456.resized.JPG P1010456.resized.JPG](https://www.hobby-machinist.com/data/attachments/443/443379-b6298219fc7ff94052e5b19c463ae6dc.jpg)
Looking from the north you can see the 1/2-20 threads and the brass set screw (3/8-24):
![P1010454.resized.JPG P1010454.resized.JPG](https://www.hobby-machinist.com/data/attachments/443/443377-97dc555351cccc071a22dd48129ad408.jpg)
Looking from the south you can see that the 1/2-20 threads have been removed:
![P1010455.resized.JPG P1010455.resized.JPG](https://www.hobby-machinist.com/data/attachments/443/443378-8206b0cd37858571131d7bae8bfe192e.jpg)
In action:
This nut is made from 303 and 360.
![P1010456.resized.JPG P1010456.resized.JPG](https://www.hobby-machinist.com/data/attachments/443/443379-b6298219fc7ff94052e5b19c463ae6dc.jpg)
Looking from the north you can see the 1/2-20 threads and the brass set screw (3/8-24):
![P1010454.resized.JPG P1010454.resized.JPG](https://www.hobby-machinist.com/data/attachments/443/443377-97dc555351cccc071a22dd48129ad408.jpg)
Looking from the south you can see that the 1/2-20 threads have been removed:
![P1010455.resized.JPG P1010455.resized.JPG](https://www.hobby-machinist.com/data/attachments/443/443378-8206b0cd37858571131d7bae8bfe192e.jpg)
In action: