A few pics of the machine after cleaning, new wicks and a coat of paint.
My main concern was to put the machine back into service and my attention to detail will never compare
to some of the fine work of other members I have seen on this forum.
Some parts were replaced, compound, new nuts for compound and cross slide, backgear, a missing gear cover.
Socket head screws replaced the slotted screws when possible.
The bed has some good nicks in it near the headstock and the high spots were removed.
Now its time to start tuning and tooling it up.
I have got a Phase 2 QCTP import to replace the original lantern type TP and put a new 5" 3 jaw to replace the old
Union 6" that came with the machine and hope to have an old 4 jaw 6" repaired in the next few days.
Bailey