A few questions. I don't want to be a PIA but I'm ignorant concerning these things and don't wanna throw good money down the drain. Please keep in mind I'm not an electronics guru in the least.
1) On the
Does this mean the faulty scale needs to be replaced? If so one could probably source it from the same seller? The seller is ashmachco.
2)
What does all that mean? Is this another example of merely needing to replace the non functioning scale? Seller: Mike Kandu
3) The Fagor NV20. It's wart:
4) This guy sounds like the best bet. Just guessing though. : acu-rite 100s 2x turn
5) This guy seems to be acceptable as well and the scales are already there. Plus free shipping. The other's want anywhere from $80 -$100 for shipping. How much do these things weigh or are they just runnin' the pork on the shipping rates??
I have 36" between centers but have yet to work that far away from the chuck. Shouldn't be a deal breaker, huh.
Thanks again guys and gals for all the time you've taken to help me out. I hope I'm able to pay it forward at a later date when I know what the heck I'm doing.
Dale
1) On the
Used Mitutoyo ALC-7705W DRO removed from a 9 X 42 Bridgeport. THE "Y" AXIS "SCALE" DOES NOT WORK. Readout works as it should. Comes with mounting hardware and power feed rod.
Does this mean the faulty scale needs to be replaced? If so one could probably source it from the same seller? The seller is ashmachco.
2)
Mitutoyo Digital Readout & Scales. Working take-Off includes mounts for Bridgeport Milling Machine, ABS Linear Scale AT2-N750 Code 529-108-1 750mm, short scale Part #unreadable 300mm, readout Model MLP-7705W. Location Top of V31
What does all that mean? Is this another example of merely needing to replace the non functioning scale? Seller: Mike Kandu
3) The Fagor NV20. It's wart:
What is an "Error 02" and what does one do to address it? Seller: priscospracosUnit powers on and displays "Error 02" on screen"
4) This guy sounds like the best bet. Just guessing though. : acu-rite 100s 2x turn
If I were to purchase this item would I just source scales for this model. Seems as I've read the scales are vendor specific. Is that correct? Seller: rgv-stingraymill“Tested. Powers on accepts commands. No further testing. As is, sale is final.”
5) This guy seems to be acceptable as well and the scales are already there. Plus free shipping. The other's want anywhere from $80 -$100 for shipping. How much do these things weigh or are they just runnin' the pork on the shipping rates??
Acu-Rite III Digital Readout
• 10 Micron Resolution
• X travel: 26"
• Y travel: 12"
• Removed from a Bridgeport with a 12 x 36" table
• Used, in working condition
Manuals are available online at acu-rite.com
I have 36" between centers but have yet to work that far away from the chuck. Shouldn't be a deal breaker, huh.
Thanks again guys and gals for all the time you've taken to help me out. I hope I'm able to pay it forward at a later date when I know what the heck I'm doing.
Dale