- Joined
- Nov 8, 2011
- Messages
- 1,678
I have a 110 volt motor I want to put on a bandsaw I'm getting ready to sell. The motor has a block on the side wit a 2 blue wires going to it and 2 brown wires going to it terminals are marked D1, K1, D2, K2 I have used this motor before and believe it to be still running but I can't get it going. I wired the chord white to orange, black to red using D1 & K1 and of course green to ground. I did the same to D1 & D2 with nothing happening. Is motor bad or am I doing this wrong? There are no schematics on the motor anywhere.