- Joined
- Sep 27, 2014
- Messages
- 3,123
Hi all, Got to thinking , I'm taking off a perfectly working mechanical drum switch and installing a vfd in its place .
Teco 7300 cv is going on a 2hp supermax mill .
My concern is the electronics that the 6 yr old chi kid put together for < 10c an hour, And ghost starts with my hands in the danger zone.
My plan is to use vfd to control machine , thinking I'll mount it under dro shelf so it's easy to get at , will that interfere with dro readings?.
Any how me and overseas electronics don't always get along real good and ied like to keep all my fingers
Seems all the popular known brand vfd s are made in china nowadays.
Should this be a concern ?.
Thanks
Derrick
Teco 7300 cv is going on a 2hp supermax mill .
My concern is the electronics that the 6 yr old chi kid put together for < 10c an hour, And ghost starts with my hands in the danger zone.
My plan is to use vfd to control machine , thinking I'll mount it under dro shelf so it's easy to get at , will that interfere with dro readings?.
Any how me and overseas electronics don't always get along real good and ied like to keep all my fingers
Seems all the popular known brand vfd s are made in china nowadays.
Should this be a concern ?.
Thanks
Derrick