- Joined
- Nov 18, 2012
- Messages
- 1,352
Topsy do you know that all was well before you did all the service on it?
It still sounds to me that the chucks are not seating onto the spindle shoulder. If you put the chucks on and then take a 0.001" feeler gauge and try to see if there is any clearance between the back of the chuck and the shoulder of the spindle. If there is then something ain't right. And it makes a big difference believe me.
David
It still sounds to me that the chucks are not seating onto the spindle shoulder. If you put the chucks on and then take a 0.001" feeler gauge and try to see if there is any clearance between the back of the chuck and the shoulder of the spindle. If there is then something ain't right. And it makes a big difference believe me.
David