- Joined
- Jul 2, 2014
- Messages
- 7,594
Here is the cool upgrade...Sounds like I should just put some lacquer on it to solve my problem- thanks for the suggestions all! Though I do still think that a handle with a freely rotating knob would be a cool upgrade!
Get a 5/8" eight point socket, make a 1/2' hex to 1/2" square adapter (or buy a cheap one from HF), buy a cheap HF 1/2" drill (under $25), and install a 8mm eye bolt in the drill to park the drill with. There are side handle threaded holes on both sides of the drill. I no longer crank the knee more than an inch, often much less than that, aside from Z axis cutting. Works well.