- Joined
- Mar 25, 2020
- Messages
- 108
Getting ready to pull the trigger on a first jump into machining. Looking at the mentioned lathes here https://www.grizzly.com/products/Grizzly-9-x-19-Bench-Lathe/G4000
Is the 10% sale anything unusual or a quarterly event?
Does the G0602 have as good a threading arrangement e.g. QCGB as the G4000?
Is the 1/2" max tooling of the G0602 vs the 3/8 max of the G4000 enough to offset gear change convenience?
What should I understand (about this decision)?
Is the 10% sale anything unusual or a quarterly event?
Does the G0602 have as good a threading arrangement e.g. QCGB as the G4000?
Is the 1/2" max tooling of the G0602 vs the 3/8 max of the G4000 enough to offset gear change convenience?
What should I understand (about this decision)?