- Joined
- Mar 26, 2018
- Messages
- 8,410
I’m going to grind some Norton stones so they become precision tool room stones.
There are a few videos out there on how to do it.
Bob Korves and I, (using his B&S surface grinder) ground my precision stones. They are great.
I purchased a 7” x 1/2” diamond wheel for my Surface grinder From Shars.
The TIR is about .008”, it’s kind of fussy to measure.
Solid Rock machine cleaned up a wheel by grinding low carbon steel and using a dressing wheel. All diamond and CBN wheels need to go through this process for best performance according to several articles I read by the manufacturers.
The beauty of A Brake dresser is You can control it. The wheel runs slower by a controlled braking method.
They run over $500.
I think it would be an interesting project
here is a Norton brand.
Norton
There are a few videos out there on how to do it.
Bob Korves and I, (using his B&S surface grinder) ground my precision stones. They are great.
I purchased a 7” x 1/2” diamond wheel for my Surface grinder From Shars.
The TIR is about .008”, it’s kind of fussy to measure.
Solid Rock machine cleaned up a wheel by grinding low carbon steel and using a dressing wheel. All diamond and CBN wheels need to go through this process for best performance according to several articles I read by the manufacturers.
The beauty of A Brake dresser is You can control it. The wheel runs slower by a controlled braking method.
They run over $500.
I think it would be an interesting project
here is a Norton brand.
Norton