- Joined
- Jun 8, 2016
- Messages
- 603
Got it almost finished. I now have a push-button start, 7.5hp RPC. I have a couple more little things to finish up but I hooked it up and tested it and all is running well. My voltage readings are:
L1-L2 250V
L1-L3 216V
L2-L3 208V
and that is totally unbalanced, no run capacitors at all. I'm running this in order to use a 12" Logan lathe and a Bridgeport clone knee mll. I have no electronics to run.
So, do I need to add caps?
Pics when I get it all done tomorrow. I'm going to add some meters/displays so I can see the voltage and amps on each line.
L1-L2 250V
L1-L3 216V
L2-L3 208V
and that is totally unbalanced, no run capacitors at all. I'm running this in order to use a 12" Logan lathe and a Bridgeport clone knee mll. I have no electronics to run.
So, do I need to add caps?
Pics when I get it all done tomorrow. I'm going to add some meters/displays so I can see the voltage and amps on each line.