- Joined
- Jun 23, 2011
- Messages
- 786
In a nutshell, there are four bolts that hold the bed to the headstock. Over the motor there are two bolts with lock nuts (one is very hard to get at). These are used to jack the headstock fore and aft. The trickiness comes when you tighten down the headstock - it tends to change the adjustment you so carefully made.
I plan on redoing it with a different method of test bar. I'll document it when I do it.
John
I plan on redoing it with a different method of test bar. I'll document it when I do it.
John