- Joined
- May 1, 2022
- Messages
- 15
Getting tired or using oil when making cuts on the grizzly lathe. For those that have or have added a flood coolant I have a question.
I've never used a flooding coolant system on a lathe. Just always old school can, oil, cutting fluid of choice. Does the flooding type systems sling the water based coolants very bad or is it about like using a brush and cutting oil?
Thanks
I've never used a flooding coolant system on a lathe. Just always old school can, oil, cutting fluid of choice. Does the flooding type systems sling the water based coolants very bad or is it about like using a brush and cutting oil?
Thanks