- Joined
- Feb 7, 2013
- Messages
- 2,493
My little POTD was to remove two pins on the loader bucket and drill deep holes in the end of the pins and
install zerks. The original zerks were located under the cylinder rams and after trying with all my grease guns
it was determined that the easy way was to relocate the zerks.
Next I need to reinstall the pins and shoot in some much needed grease. In the long run, the loader will thank me
for my efforts.
install zerks. The original zerks were located under the cylinder rams and after trying with all my grease guns
it was determined that the easy way was to relocate the zerks.
Next I need to reinstall the pins and shoot in some much needed grease. In the long run, the loader will thank me
for my efforts.