- Joined
- Dec 18, 2019
- Messages
- 6,447
I was listening to my wife extolling all sorts of gifts for those (of us) that seem to have everything. Heard about lots of gifts that didn't seem all that useful to me. Finally I said, I know what I could use, a filament dryer box and showed her one. She looked at me and said, umm, why don't you pick one out for yourself.
Any recommendations for something that works and is under $100? My needs are pretty simple. I'd like a unit that would allow me to print from the box. It should be heated, have a humidity sensor and I guess a fan that exhausts some air so the humidity actually is reduced. A single standard 1 kg reel is fine, although holding two wouldn't be bad. It's hard to know what works, is quiet and is cost effective. When not printing, I can store the filament in a bag with desiccant. I bought some vacuum bags and have a gallon of silica gel.
Any recommendations for something that works and is under $100? My needs are pretty simple. I'd like a unit that would allow me to print from the box. It should be heated, have a humidity sensor and I guess a fan that exhausts some air so the humidity actually is reduced. A single standard 1 kg reel is fine, although holding two wouldn't be bad. It's hard to know what works, is quiet and is cost effective. When not printing, I can store the filament in a bag with desiccant. I bought some vacuum bags and have a gallon of silica gel.