Got this off a scrappers truck for $25 with three chucks amd a s--t load of tooling.
I lost 54 of the first photos due to the planets not being aligned, causing me to push the wrong button. Here are the pics in somewhat of the right order.![118.JPG 118.JPG](https://www.hobby-machinist.com/data/attachments/10/10422-917d9179ad950a7ca35065975a744676.jpg)
![119.JPG 119.JPG](https://www.hobby-machinist.com/data/attachments/10/10423-e1dd86f78ebb353b5274ca8d72b79fac.jpg)
![120.JPG 120.JPG](https://www.hobby-machinist.com/data/attachments/10/10424-24ca2ef7b1399c1c642ab0f8395b3a22.jpg)
![122.JPG 122.JPG](https://www.hobby-machinist.com/data/attachments/10/10425-dda52b1c2f714443c5613d9fd86ddd23.jpg)
![124.JPG 124.JPG](https://www.hobby-machinist.com/data/attachments/10/10426-3d3140a5c271a28198a9ec76be5f948c.jpg)
![128.JPG 128.JPG](https://www.hobby-machinist.com/data/attachments/10/10427-5a20d77f9f811cbb7ace6d6214c91208.jpg)
![129.JPG 129.JPG](https://www.hobby-machinist.com/data/attachments/10/10428-74cc8e5d6efdc17a2d8997e33b6cfda0.jpg)
![130.JPG 130.JPG](https://www.hobby-machinist.com/data/attachments/10/10429-3b86c5a530ab954854f653e4b21c7971.jpg)
![171.JPG 171.JPG](https://www.hobby-machinist.com/data/attachments/10/10430-52cacb0f89d975d24ce8211b11c1af01.jpg)
![173.JPG 173.JPG](https://www.hobby-machinist.com/data/attachments/10/10431-3c90def319d79675c71e1eacf30ecfce.jpg)
![175.JPG 175.JPG](https://www.hobby-machinist.com/data/attachments/10/10432-d07f3987152ebdc51a6e24ec91f585da.jpg)
![182.JPG 182.JPG](https://www.hobby-machinist.com/data/attachments/10/10433-f2a5b508221ad0f64fbb6cabc2043109.jpg)
![183.JPG 183.JPG](https://www.hobby-machinist.com/data/attachments/10/10434-86c44057c8f12ed24f9506c7f716cc38.jpg)
![atlas cats misc.JPG atlas cats misc.JPG](https://www.hobby-machinist.com/data/attachments/10/10435-acacb4633f62ea70e409c6327a404fd7.jpg)
First chips!!!
The only thing I found wrong with it is the miter gears for the power cross feed are broken. Anybody have a set they want to sell?
I had been thinking about painting it but I think it I would not want to use it if It looked too purty.
The lathe will be used for making pyrotechnic tools.
Dennis
Helena, Montana
![001.JPG 001.JPG](https://www.hobby-machinist.com/data/attachments/10/10436-afd85fee238ed492b9bc790a55ae149d.jpg)
I lost 54 of the first photos due to the planets not being aligned, causing me to push the wrong button. Here are the pics in somewhat of the right order.
![118.JPG 118.JPG](https://www.hobby-machinist.com/data/attachments/10/10422-917d9179ad950a7ca35065975a744676.jpg)
![119.JPG 119.JPG](https://www.hobby-machinist.com/data/attachments/10/10423-e1dd86f78ebb353b5274ca8d72b79fac.jpg)
![120.JPG 120.JPG](https://www.hobby-machinist.com/data/attachments/10/10424-24ca2ef7b1399c1c642ab0f8395b3a22.jpg)
![122.JPG 122.JPG](https://www.hobby-machinist.com/data/attachments/10/10425-dda52b1c2f714443c5613d9fd86ddd23.jpg)
![124.JPG 124.JPG](https://www.hobby-machinist.com/data/attachments/10/10426-3d3140a5c271a28198a9ec76be5f948c.jpg)
![128.JPG 128.JPG](https://www.hobby-machinist.com/data/attachments/10/10427-5a20d77f9f811cbb7ace6d6214c91208.jpg)
![129.JPG 129.JPG](https://www.hobby-machinist.com/data/attachments/10/10428-74cc8e5d6efdc17a2d8997e33b6cfda0.jpg)
![130.JPG 130.JPG](https://www.hobby-machinist.com/data/attachments/10/10429-3b86c5a530ab954854f653e4b21c7971.jpg)
![171.JPG 171.JPG](https://www.hobby-machinist.com/data/attachments/10/10430-52cacb0f89d975d24ce8211b11c1af01.jpg)
![173.JPG 173.JPG](https://www.hobby-machinist.com/data/attachments/10/10431-3c90def319d79675c71e1eacf30ecfce.jpg)
![175.JPG 175.JPG](https://www.hobby-machinist.com/data/attachments/10/10432-d07f3987152ebdc51a6e24ec91f585da.jpg)
![182.JPG 182.JPG](https://www.hobby-machinist.com/data/attachments/10/10433-f2a5b508221ad0f64fbb6cabc2043109.jpg)
![183.JPG 183.JPG](https://www.hobby-machinist.com/data/attachments/10/10434-86c44057c8f12ed24f9506c7f716cc38.jpg)
![atlas cats misc.JPG atlas cats misc.JPG](https://www.hobby-machinist.com/data/attachments/10/10435-acacb4633f62ea70e409c6327a404fd7.jpg)
![001.JPG 001.JPG](https://www.hobby-machinist.com/data/attachments/10/10436-afd85fee238ed492b9bc790a55ae149d.jpg)
The only thing I found wrong with it is the miter gears for the power cross feed are broken. Anybody have a set they want to sell?
I had been thinking about painting it but I think it I would not want to use it if It looked too purty.
The lathe will be used for making pyrotechnic tools.
Dennis
Helena, Montana
![118.JPG 118.JPG](https://www.hobby-machinist.com/data/attachments/10/10422-917d9179ad950a7ca35065975a744676.jpg)
![119.JPG 119.JPG](https://www.hobby-machinist.com/data/attachments/10/10423-e1dd86f78ebb353b5274ca8d72b79fac.jpg)
![120.JPG 120.JPG](https://www.hobby-machinist.com/data/attachments/10/10424-24ca2ef7b1399c1c642ab0f8395b3a22.jpg)
![122.JPG 122.JPG](https://www.hobby-machinist.com/data/attachments/10/10425-dda52b1c2f714443c5613d9fd86ddd23.jpg)
![124.JPG 124.JPG](https://www.hobby-machinist.com/data/attachments/10/10426-3d3140a5c271a28198a9ec76be5f948c.jpg)
![128.JPG 128.JPG](https://www.hobby-machinist.com/data/attachments/10/10427-5a20d77f9f811cbb7ace6d6214c91208.jpg)
![129.JPG 129.JPG](https://www.hobby-machinist.com/data/attachments/10/10428-74cc8e5d6efdc17a2d8997e33b6cfda0.jpg)
![130.JPG 130.JPG](https://www.hobby-machinist.com/data/attachments/10/10429-3b86c5a530ab954854f653e4b21c7971.jpg)
![171.JPG 171.JPG](https://www.hobby-machinist.com/data/attachments/10/10430-52cacb0f89d975d24ce8211b11c1af01.jpg)
![173.JPG 173.JPG](https://www.hobby-machinist.com/data/attachments/10/10431-3c90def319d79675c71e1eacf30ecfce.jpg)
![175.JPG 175.JPG](https://www.hobby-machinist.com/data/attachments/10/10432-d07f3987152ebdc51a6e24ec91f585da.jpg)
![182.JPG 182.JPG](https://www.hobby-machinist.com/data/attachments/10/10433-f2a5b508221ad0f64fbb6cabc2043109.jpg)
![183.JPG 183.JPG](https://www.hobby-machinist.com/data/attachments/10/10434-86c44057c8f12ed24f9506c7f716cc38.jpg)
![atlas cats misc.JPG atlas cats misc.JPG](https://www.hobby-machinist.com/data/attachments/10/10435-acacb4633f62ea70e409c6327a404fd7.jpg)
![001.JPG 001.JPG](https://www.hobby-machinist.com/data/attachments/10/10436-afd85fee238ed492b9bc790a55ae149d.jpg)