Your lathe is the same as the Birmingham ycl 1340gh, The brass gear that mates with the worm in the apron for the longitudinal feed seems to be the weak spot for this lathe model, And actually quite a few more import lathes, People don't make sure the aprons are full of the proper mineral oil and the gear wears out quickly. I have seen several of this model of lathes for sale with the power feed inop. Parts are non existant for these, Grizzly does not support this lathe anymore, Their part number was Grizzly GHB1340, Here is a pic of the Griz, A Jet 1340GHB And A pic of the Birmingham, And at the bottom the Enco. These are actually really good machines.
And here is the Enco Equivalent
You might try Penn Tool, They are a Birmingham dealer and the gear should fit your Enco, But most of these dealers are more than happy to sign you up for a new machine, But they don't stock many parts and could care less about support after the sale.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.