- Joined
- Apr 1, 2015
- Messages
- 76
I am pulling together stuff for a console I am building for my '56 wagon. I was wanting to put some type of emblem on the sides so I decided to model one up in UG. These pics are screen shots off the computer. I did this in about an hours time.
This is 1 1/2" tall and 6 3/4" long. I had them 3D printed in black. Some 3M trim tape will be used to attach them.
Colors will be as you see them in the jpegs but I can play around with those in the computer.
Mark
This is 1 1/2" tall and 6 3/4" long. I had them 3D printed in black. Some 3M trim tape will be used to attach them.
Colors will be as you see them in the jpegs but I can play around with those in the computer.
Mark