I finally found a 4 jaw for my Martin Lathe. Actually two. Both are D1-8 mounts, one is 19" and one is 12". The big one will work great as a faceplate for me.
Cheers
Martin W
Hi Daryl
She was built in Germany in 1957. Martin DLZ 502. 20" x 84" between centers. She runs like a Swiss wrist watch, nice and smooth and quiet. Has a imperial lead screw. 65mm bore thru headstock 16rpm up to 1540rpm
Cheers
Martin
She was built in Germany in 1957. Martin DLZ 502. 20" x 84" between centers. She runs like a Swiss wrist watch, nice and smooth and quiet. Has a imperial lead screw. 65mm bore thru headstock 16rpm up to 1540rpm
Thanks.
She weighs 8000 pounds and is the centre piece of my shop.
10 hp motor which I run off a rotary phase converter and a 600 volt step up transformer. Was saved from a building which was being torn down. Sat idle for 25 years. I also bought my DoAll bandsaw from the same place. Both machines seem to have very little use and run like new.
Now I need to build a jib hoist to change the big chuck. Any pics?
Let me know when you are going to be in Niagara. No shortage of wine tasting here. 40 Creek Distillery and Dillons Small Batch Distillery is pretty close also.
Cheers
Martin
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.