- Joined
- May 10, 2017
- Messages
- 1,199
I have new lathe that I need to level and I have a Starrett 98 Machinist Level that I thought was pretty sensitive. I've seen several comments on different threads that the 98 was good for roughing in at best. I believe the 98 has graduations at 0.005 per foot. The Starrett 199, at .0005, has been mentioned several times in various threads but it comes in at just under $1 K.
A quick search turned up several options ranging from $80 to well over $1K. I didn't see any with calibration certification for under $700
My lathe is 12x36,
What are you guys using?
A quick search turned up several options ranging from $80 to well over $1K. I didn't see any with calibration certification for under $700
My lathe is 12x36,
What are you guys using?