- Joined
- Feb 2, 2014
- Messages
- 112
Good idea!
My strange idea is to have the wise as "clean" as possible, no more screws, only bolts in the end where there is a lose bolt now.
Then creating a slot in the shaft of the lathe or only a groove on one side?
only a slot is the strongest, but not that easy?
And then put some clean bolts in with a little press.
My strange idea is to have the wise as "clean" as possible, no more screws, only bolts in the end where there is a lose bolt now.
Then creating a slot in the shaft of the lathe or only a groove on one side?
only a slot is the strongest, but not that easy?
And then put some clean bolts in with a little press.
Last edited: