- Joined
- Oct 17, 2018
- Messages
- 925
I'd like to power my iGaging DRO's on my mill (I have 3, one for each axis) with an AC power adapter. BUT, I'd like to use ONE plug that has 3 cords, one for each DRO unit. Anyone ever done this?
I was thinking this one would work. Here's a screenshot in case the link is dead:
Each unit runs on 3V (300mA, I think), so I thought a 9V power adapter would work. The one linked above is 1000mA. Electricity is not my strong suit, so let me know if this will work or not, or if there is a better solution.
Thanks!
-Jeff
---------
I was thinking this one would work. Here's a screenshot in case the link is dead:
Each unit runs on 3V (300mA, I think), so I thought a 9V power adapter would work. The one linked above is 1000mA. Electricity is not my strong suit, so let me know if this will work or not, or if there is a better solution.
Thanks!
-Jeff
---------
Last edited: