- Joined
- Jun 17, 2012
- Messages
- 2,220
Thats a great point. If the slide is not aligned properly, it could cause that problem. If it's severely out of alignment, the slides could even get ruined. Watch the display as you move it through it's range, with the screws loosened up. Get one end right, snug the screws slightly, move to the other end, repeat. Then tighten them back up once you have them where there's no prying or binding.My acu-rite DRO did the same thing on one of the scales and after cleaning the scale and realigning it the
problem was solved. Mine has the glass scales and I cleaned it several times with denatured alcohol followed
by glass cleaner.