Anyone know what these gadgets are and there operation?

[S5rx7]

I think the one should be a dividing thing of some sort but all the holes are spaced the same. Could be wrong.

 

[mmcmdl]

Top right is a spindexer .

 

[Cadillac]

The goldish pieces in the upward left corner and the chuck with the blades in it are for a drill grinder setup. By the color I’d say darex. Top right is a manual spin fixture. Bottom is a motorized spin fixture typically used on a surface grinder to grind cylindrical parts.

 

[woodchucker]

the other parts look like a tool sharpener.
maybe for end mills. The one with the pins and eccentric seems like for a holder for doing drill bits.

 

[S5rx7]

Top right is a spindexer .

Thanks. Seems like a usful piece. Sent me down a rabbit hole.

 

[S5rx7]

The goldish pieces in the upward left corner and the chuck with the blades in it are for a drill grinder setup. By the color I’d say darex. Top right is a manual spin fixture. Bottom is a motorized spin fixture typically used on a surface grinder to grind cylindrical parts.

That doall spin fixture must take collet or something?

 

[S5rx7]

the other parts look like a tool sharpener.
maybe for end mills. The one with the pins and eccentric seems like for a holder for doing drill bits.

Interesting

 

[Firebrick43]

It all goes together to form a tool sharpening system, drills, endmills and such.

 

[mmcmdl]

It'll spin . It'll index . It'll slice and dice also . Darn near a Ronco Vegematic ! Yep , 5C collets .

 

[682bear]

These 2 pieces...



...is a large drill sharpening attachment for a Darex M5 sharpener... it will allow the M5 to sharpen drills from 3/4" up to 1-1/8"...

I would guess that someone who has an M5 that didn't come with that optional attachment might be very interested in those two pieces.

-Bear