- Joined
- Feb 24, 2018
- Messages
- 1,044
A while back I made a set of gas spuds for 2 large boilers, I was told they needed to be 3/8" x 4-1/2" stainless steel gas spuds with (10) 3/16" orifices. Welp either my measuring equipment is on a different standard, than theirs or they made a serious error, they actually need to be 1/2" x 3-1/4" stainless steel gas spuds with (10) 3/16" orifices.
1 - start with 1/2" x 5", 304 grade stainless steel nipples
2 - cutting them to 3-3/8" long
3 - the left overs
4 - the raw stock for the 35 needed gas spuds|
1 - start with 1/2" x 5", 304 grade stainless steel nipples
2 - cutting them to 3-3/8" long
3 - the left overs
4 - the raw stock for the 35 needed gas spuds|
Last edited: