Hi I'm looking for a 3 axis DRO for my Bridgeport 1940's M model milling machine. The issue I'm having is everything I see is for a table that's longer than 9x32. Thanks guys!
You order scales for the amount of TRAVEL in your mill. Extra length won't bother you unless the scales are so long they stick off the end of the table. There a lot of room for extra scale length.
I've got a 3 axis setup from DroPros. They have plenty of information on their site for "sizing" DRO scales to your machine and the magnetic scales they sell are very simple to cut to length.
I bought a Meister Top 10 with glass scales from an Ebay seller in Hong Kong years back for about $480 delivered. I told him the length of scales I needed and he had the factory make them to size.
I've cut and modified my own glass scales since then for other machines, it's not really very hard but you have to plan ahead for reattaching the end cap.
Take a look at TouchDRO as an alternative to a traditional DRO. It uses an Android tablet for the interface, and can use anything from cheap Chinese digital scales to high end glass scales. The interface is full featured, and how many other DROs do you know of which can play Pandora or let you watch a movie? TouchDRO is open source so it's free.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.