Bridgeport Rotary Table Questions?

gi_984

Active User
Registered
Joined
Dec 13, 2012
Messages
526
Just picked up a very nice 12 inch Bridgeport brand rotary table. Just a few questions for anyone here who has one.
1. The data plate says to use Sunway 1180. What lubricant do you use?
2. How do you adjust the backlash out of the hand wheel?
3. Anyone have a manual for it?
 
I think I might have the manual Ill look and see and send a PM. Did yours come with the right angle plate and tailstock?
 
Thanks! I appreciate it. Unfortunately it didn't come with them.
 
I am considering buying a 12 inch Bridgeport but am wondering if it is something that I can move to and from the mill unassisted. Can someone tell me what that thing weighs? The man who is selling it was only guessing at its weight and did not have the means to weigh it? I don’t want to have to make a lift to put it on the table.
 
I have a 12" Bridgeport brand table...I think I use ATF in it, but I can't remember why. :) And it's heavy, I don't have the weight. While I can lift it, it's at the limit of what I can handle, so I keep it on a cart and move the table to match height so I can more or less slide it across, though it takes some maneuvering to make sure chips are not trapped. It's a very solid table, and I have the Bridgeport angle plate to run it vertically, though there's not been a need for that yet. Backlash, don't know, it's never been an issue...just keep it going in the same direction.

Overall it's beautifully smooth and precise.
 
I just bought a Bridgeport 12 inch table and am waiting for it to arrive. Shipping weight is 133lbs., including the crating. So, I‘m guessing it’ll be about 120 or 125lbs. We‘ll see soon enough. Either way it’s more than I can comfortably move about. So now I’m researching a reasonable method of moving it to and from the mill. Since, I have only a 42 inch table, I can’t very well just leave it on the mill.
Regarding the required lubricant, it’s my understanding that the same way oil that’s used on the mill can be used on the rotary table. Is that not correct?
 
Best way to move heavy objects on&off is having a cart dedicated for accessories. Lower or raise the table to cart height and gingerly slide it off or on.
 
I seem to recall ATF being what was recommended and what I used for my 12” Bridgeport rotary, seems to work very well. This is really an excellent rotary table, by the way. I also have a factory angle bracket for vertical operation, and keep it on a rolling cart so I can lower the mill table and just slide it on/off.
 
I have a Troyke 15" and a couple if import rotary tables and use Mobil Vactra #2 in all of them.
 
Back
Top