- Joined
- Feb 24, 2018
- Messages
- 1,044
We have a job coming up, where the customer ordered the boiler directly from the manufacturer, then as an after thought bought the burner directly from a totally different manufacturer. Unfortunately, while they both have the same BTU rating, they do not exactly fit together, their only options are to either, (A) buy another burner (roughly $21,000) or (B) have us make an adapter to make them fit and work together (roughly $2000-$3000). They selected option B.
1 - laid out the bolt holes on boiler plate
2 - laid out the bolt holes and pilot cut-out for burner plate
2 - the plate to the boiler cut out and bolt holes drilled
3 - the plate the burner will bolt to, cut-out, with pilot cut-out and bolt holes
1 - laid out the bolt holes on boiler plate
2 - laid out the bolt holes and pilot cut-out for burner plate
2 - the plate to the boiler cut out and bolt holes drilled
3 - the plate the burner will bolt to, cut-out, with pilot cut-out and bolt holes