Here is a cabinet I have built for storing small fasteners and tooling. I have shared this on another forum and thought it may be of interest here.
The frame is built from 80/20 extrusions.
The parts containers were purchased from Harbor Freight with a discount coupon found here.
http://www.hfqpdb.com/coupons/204_ITEM_20_BIN_PORTABLE_PARTS_STORAGE_CASE_1446503284.8555.JPG
There is 9 per visit limit, but some stores will let you purchase as many as needed. So may have to make a few trips. I also have seen the Stanley brand on sale for similar price at Menards if your in the midwest
The BB drawer slides were purchased here.
http://www.wwhardware.com/kv-tt100-economy-100-lb-full-extension-drawer-slide-kvtt100
The drawer components are configured to allow the lids to be opened over center allowing a stay open feature, also each container can be lifted out and taken to work location.
The components for the drawer were cnc machined from 6061 alum. bar stock.
If anyone is interested I would be willing to share cad files for drawer components. Been contemplating offering the drawer components as a kit, but not sure it would be cost prohibitive.
The frame is built from 80/20 extrusions.
The parts containers were purchased from Harbor Freight with a discount coupon found here.
http://www.hfqpdb.com/coupons/204_ITEM_20_BIN_PORTABLE_PARTS_STORAGE_CASE_1446503284.8555.JPG
There is 9 per visit limit, but some stores will let you purchase as many as needed. So may have to make a few trips. I also have seen the Stanley brand on sale for similar price at Menards if your in the midwest
The BB drawer slides were purchased here.
http://www.wwhardware.com/kv-tt100-economy-100-lb-full-extension-drawer-slide-kvtt100
The drawer components are configured to allow the lids to be opened over center allowing a stay open feature, also each container can be lifted out and taken to work location.
The components for the drawer were cnc machined from 6061 alum. bar stock.
If anyone is interested I would be willing to share cad files for drawer components. Been contemplating offering the drawer components as a kit, but not sure it would be cost prohibitive.