- Joined
- Feb 16, 2015
- Messages
- 20
Ok so I purchased and had installed a 3 phase rotary converter. I'm thinking I'd like to control my mill only with a VFD. it's a 1/2 HP bridgeport M head. I have a 3 phase load center box that is wired to a disconnect and the disconnect has a plug on it for my milling machine.
Could I some how go from the machine to a VFD to the plug? I don't need the phase converter features. I just want the ability to control my motor speed. Do I just ignore the 1 phase input side and use only the 3 phase input and output on a VFD?
Could I some how go from the machine to a VFD to the plug? I don't need the phase converter features. I just want the ability to control my motor speed. Do I just ignore the 1 phase input side and use only the 3 phase input and output on a VFD?