I'm still trying to find a new motor for my mill to get it back to close to factory spec. I'm having trouble finding something with a long enough shaft for the 5-step pulley, face mount, but still in the under 5hp range. Now someone up in tucson has this motor on CL for cheap.
http://www.spapumpsandmore.com/Ultra_Jet_Pump_PUULS220258220G_1014224_p/puuls220258220g.htm
It's 2HP which fits the bill nicely, and has four holes for face mounting, but does anyone now how much, if any, shaft is left when you unplug the pump part? The pulley on my mill is at least 3.5" long and the motor sits on top of a 1/2-3/4" thick plate so I need a motor with a shaft at least 4" long.
thanks
Joe
http://www.spapumpsandmore.com/Ultra_Jet_Pump_PUULS220258220G_1014224_p/puuls220258220g.htm
It's 2HP which fits the bill nicely, and has four holes for face mounting, but does anyone now how much, if any, shaft is left when you unplug the pump part? The pulley on my mill is at least 3.5" long and the motor sits on top of a 1/2-3/4" thick plate so I need a motor with a shaft at least 4" long.
thanks
Joe