Carriage clamp?

taltexan

Registered
Registered
Joined
May 4, 2016
Messages
51
Anyway to fish out the clamp part without dropping the apron? The clamp bolt was sheared. I don’t know I checked the oil filter and the pan was full of sludge. Might need to check the apron anyway!
 
Thanks, question was can I get the clamp out without pulling the apron?
 
Likely, you can't; even if you could, getting it back in place would likely be difficult, bite the bullet and take it apart, clean things out, make a good job of it.
 
I tried but will have to drop the apron to get the clamp. You’re right a good cleaning and checking oil lines won’t hurt it. Thanks
 
Back
Top