Carriage Stop

RandyM

Mr. Deliberate
H-M Supporter Gold Member
Joined
Apr 12, 2011
Messages
3,485
I decided I needed a carriage stop. Here is my rendition. It uses a leftover stop nut from my mill. The stop nut is permanently Locktited to the threaded rod. Not sure how I've lived without it. I use it all the time. I made it's own bolt so that I only needed the one size wrench. The micrometer thread is .500-20 and the bolt is a .375-16. The both use a 3/4 inch wrench.

Carriage Stop 2.JPGCarriage Stop Bolt 02.JPG
 
Back
Top