- Joined
- Jan 22, 2014
- Messages
- 578
This past week I made a Xmas ornament. My local plastic vendor had some nice renants of 1/4" and 3/4" purple and green rod and some nice 1/2" clear twisted stock.
I used the mill/rotary table w/ angle plate to make a green octogon hub w/ holes for the tenons. I turned all of the rod tenons and tapers on the lathe.
Fun to work with plex on occasion.
I used the mill/rotary table w/ angle plate to make a green octogon hub w/ holes for the tenons. I turned all of the rod tenons and tapers on the lathe.
Fun to work with plex on occasion.
Last edited: