- Joined
- Jan 21, 2021
- Messages
- 452
Hello, I was looking at a change gear set on Flea-bay, as I'm trying to improvise a set of them for my Emco Compact 8 which never had them. I asked the vendor what the width of the gears were and what was the bore diameter. I had carefully looked at all the information supplied on the site, and those values are not there, or I wouldn't have asked ....so they replied with a paragraph of .....I should refer to the info on the site, RATHER than just answer my question with 2 numbers!
The site mentions the CJ0618 lathe and it's variants. Could I please ask any owner of one of these lathes to tell what the values are for the bore and width? I refrained from tell the Gent, tht maybe he should maybe go look himself as he is wrong!
Thanks,
Steve
The site mentions the CJ0618 lathe and it's variants. Could I please ask any owner of one of these lathes to tell what the values are for the bore and width? I refrained from tell the Gent, tht maybe he should maybe go look himself as he is wrong!
Thanks,
Steve