Clark cy 70 forklift

fernballan

H-M Supporter - Gold Member
H-M Supporter Gold Member
Joined
Sep 24, 2017
Messages
550
Hi
I bought an old clark forklift it goes on gasol I have never worked with.I have been searching for points but can not find any in Sweden.I would also need the distributor as the cams are very worn
 

Attachments

  • IMG_20200602_164830.jpg
    IMG_20200602_164830.jpg
    2.7 MB · Views: 19
  • IMG_20200602_133657.jpg
    IMG_20200602_133657.jpg
    2.5 MB · Views: 22
  • IMG_20200602_121021.jpg
    IMG_20200602_121021.jpg
    2.5 MB · Views: 19
  • IMG_20200602_133649.jpg
    IMG_20200602_133649.jpg
    3.3 MB · Views: 21
  • IMG_20200602_133601.jpg
    IMG_20200602_133601.jpg
    2.9 MB · Views: 18
  • IMG_20200602_133556.jpg
    IMG_20200602_133556.jpg
    2.1 MB · Views: 15
  • IMG_20200602_133552.jpg
    IMG_20200602_133552.jpg
    2.3 MB · Views: 14
petronix makes a retrofit kit for old distributors that converts points/condenser to an electronic pick up.
i have done more than 100 forklift retrofits with these kits
it would eliminate the need for points and condenser and the starting is greatly improved
i found a kit on amazon


here is the complete kit:

 
Last edited:
i love the old flat heads!

if you need a distributor, i'm sure i could find one ans ship parts to you
 
petronix makes a retrofit kit for old distributors that converts points/condenser to an electronic pick up.
i have done more than 100 forklift retrofits with these kits
it would eliminate the need for points and condenser and the starting is greatly improved
i found a kit on amazon


here is the complete kit:

Thanks i check it
 
That'll be most appreciated
 

Attachments

  • IMG_20200603_061351.jpg
    IMG_20200603_061351.jpg
    2.1 MB · Views: 9
  • IMG_20200602_152042.jpg
    IMG_20200602_152042.jpg
    1.8 MB · Views: 9
  • IMG_20200602_151815.jpg
    IMG_20200602_151815.jpg
    2 MB · Views: 10
  • IMG_20200602_151558.jpg
    IMG_20200602_151558.jpg
    1.3 MB · Views: 10
the nice thing about the Petronix kit, there is a magnetic ring that goes over the worn lobes of the distributor
you remove the points and condenser, install a mounted plate, install the magnetic ring and set the clearance to the pick up
and re-install the cap and wires
 
the nice thing about the Petronix kit, there is a magnetic ring that goes over the worn lobes of the distributor
you remove the points and condenser, install a mounted plate, install the magnetic ring and set the clearance to the pick up
and re-install the cap and wires
So i dont need a new distributor?
 
Back
Top