Clausing Lathe Model 100 Mk3 Gear Train Cover

[DanLins]

Gunrunner you need to order a set of these for the Z axis hand crank. Bill did you just spit coffee on your monitor? :rofl:

View attachment 253356

 

[DanLins]

A gentleman from Los Altos, California was kind enough to donate his gear train to me. Lotsa nice folks participate in these forums.....

Dan L

 

[wa5cab]

Did you get everything that you were looking for?

 

[DanLins]

Robert,

Yep, everything except the wide 75 tooth gear that drives the shaft to the QC gearbox. My brother and I are going to make this gear.

The only other thing missing is the gear train shroud, which may be impossible to locate.

Thanks,

Dan L

 

[wa5cab]

OK. I would suggest that you set up a daily search for the remaining two items on eBay and just let it run until you acquire one elsewhere or until you get a valid hit. I've turned up quite a few obscure items that way over the years. I also edited the title to what you are still missing.

 

[DanLins]

Thanks, Robert. I really don't need that wide 75 tooth gear however. I'll try your eBay search, see what happens.

Dan L

 

[wa5cab]

OK. I'll take it off.